Re: [DML] Re: Please help- My Delorean won't start...
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [DML] Re: Please help- My Delorean won't start...
- From: "DMC Joe" <dmcjoe@xxxx>
- Date: Wed, 6 Jun 2001 16:39:49 -0400
John,
You said:
"The ignition coil will also breakdown due to heat after a while."
I'm not sure if you are referring to the ignition coil or impulse coil, in either case both components have an extremely low failure rate.
My comments are made only to avoid confusion or miss-information concerning the failure rates of certain DeLorean parts. Your comment may lead some readers to think that these components fail on a regular basis.
DMC Joe
"We're here to help you"
DMC Help / De Lorean Services / <dmchelp@xxxx>
Web Site: <http://www.deloreanservices.com"> DeLorean services.com
DMC.tv is in your future .....
----- Original Message -----
From: dherv10@xxxx
To: dmcnews@xxxxxxxxxxxxxxx
Sent: Wednesday, June 06, 2001 8:49 AM
Subject: [DML] Re: Please help- My Delorean won't start...
Jeff, I would jump #30 and #87 on the RPM relay to make sure the fuel
pump is giving gas to the system. If it is pumping gas, then that may
eliminate a defective fuel pump. If the pump doesn't run after
jumping the wires then defective pump. There is a pulse coil in the
distributor that accuates the RPM relay. If the coil goes, which they
do, then it will show this kind of symptom.The ignition coil will
also breakdown due to heat after a while
Back to the Home of PROJECT VIXEN