Re: [DML] start problem
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [DML] start problem
- From: "DMC Joe" <dmcjoe@xxxx>
- Date: Mon, 4 Jun 2001 07:05:24 -0400
Your starting problem may be related to either the idle speed or fuel enrichment circuit. To check the idle speed circuit unplug the idle speed motor (regulator) while the engine is at idle than plug it back in. If there is no change in idle speed you have a defective idle speed component which will effect start and run conditions.
Concerning the fuel enrichment circuit check to insure that the frequency valve is buzzing continuously during starting and cold idling.
All of the factory installed DeLorean fuses are of the correct ratings.
DMC Joe
"We're here to help you"
DMC Help / De Lorean Services / <dmchelp@xxxx>
Web Site: <http://www.deloreanservices.com"> DeLorean services.com
DMC.tv is in your future .....
----- Original Message -----
From: Steve Bunnell
To: DMC Mailing List
Sent: Saturday, June 02, 2001 8:06 PM
Subject: [DML] start problem
I'm having a starting problem with my D. I'm pretty sure its fuel related and not electrical.
Back to the Home of PROJECT VIXEN