Re: [DML] Re: Hard Starting.
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [DML] Re: Hard Starting.
- From: "DMC Joe" <dmcjoe@xxxx>
- Date: Fri, 25 May 2001 15:46:07 -0400
You said:
"it appears to have stopped surging which was a symptom that it had when
you first started the car on a cold start."
The idle surge or "hunting" when cold is a normal characteristic of the K-Jetronic CIS fuel injection system.
DMC Joe
"We're here to help you"
DMC Help / De Lorean Services / <dmchelp@xxxx>
Web Site:DeLorean Services.com
DMC.tv is in your future.....
----- Original Message -----
From: SGSKBM@xxxx
To: dmcnews@xxxxxxxxxxxxxxx
Sent: Friday, May 25, 2001 12:51 PM
Subject: [DML] Re: Hard Starting.
--- In dmcnews@xxxx, DMCVegas@xxxx wrote:
>
> But one thing is that I don't understand how the replacement of an
> entire distributor could have solved your problem. The distributor
> itself is not responsible for any type of fuel pressure retention.
> Less of course the Primary Pressure Regulator. If there was a bad
seal
> (s) in the unit, I could understand how it would have been able to
> bleed off pressure 'forwards' thru the system via the return fuel
> line. But I also imagine that it could have been replaced by itself
> without the entire distributor. If I am wrong, someone please
correct
> me.
>
> I agree with your feelings and after the initial shock of the
findings (price wise) settled, I came to the same conclusion. I saw
them trade out the Primary Pressure Regulator and the same problem
persisted after the swap. I could only conclude that the fuel
distributor was defective internaly and was leaking inside.
As it turns out they changed the distributor and fired up the car and
it held pressure! I have not had the hot start problem since and it
appears to have stopped surging which was a sympton that it had when
you first started the car on a cold start.
I am not convinced that the fuel distributor was really defective but
all of the evidence certainly points in that direction. If I can be
of any further asistance please do not hesitate to contact me.
Scot
6452
[Non-text portions of this message have been removed]
Back to the Home of PROJECT VIXEN