Re: starting up
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: starting up
- From: jtrealty@xxxx
- Date: Sat, 19 May 2001 21:24:32 -0000
There are two things that you can check very simply. Make sure that
the inertia switch is still "set". Just push on the top of the plunger
to make sure it is down. It is either located by the counter by the
brake pedal or on the left side by the hood release. If that doesn't
do it go to the fuse panel behind the passenger seat and check fuse
#7. It should be a 20 amp fuse. Make sure it didn't blow and the
connectors to it aren't burnt. If these quick checks don't do it you
might have a bad fuel pump but you won't know without further
checking.
David Teitelbaum
vin 10757
--- In dmcnews@xxxx, scottymckenzie@xxxx wrote:
> My D doesn't start anymore, it tries to but never gets going.
> There is also no noise anymore when i first turn the key to
> position 3 i think. I mean that 2 second noise you normally hear
> before cranking... it seems like there is a problem with the
> engine not getting the fuel?
Back to the Home of PROJECT VIXEN