RE: [DML] Door light Hidden Switch - easy fix
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: [DML] Door light Hidden Switch - easy fix
- From: "Michael C. Babb" <michael@xxxx>
- Date: Tue, 20 Mar 2001 13:06:06 -0500
You can actually make a simple switch to control all of the door lights and
dome lights at the same time (perfect for car shows). Wire up the toggle
switch and add an inline fuse holder. Remove the fuse for the interior
lights, and put it in the inline holder. You can then plug in the toggle
switch, and route it to a convenient location just behind the drivers or
passenger seats. I put one in my car and should easily reach it when
parking if I wanted to leave the door open for a bit (car shows, cleaning,
etc.).
If you want a faster solution, simply unplug the fuse when you are at shows
I can't remember the fuse number, but it is the bottom/middle fuse . .
.(maybe # 14).
Hope this helps!
Michael
-----Original Message-----
From: Watkins Family [mailto:watbmv@xxxx]
Sent: Tuesday, March 20, 2001 10:15 AM
To: dmcnews@xxxxxxxxxxxxxxx
Subject: [DML] Door light Hidden Switch
There was a post recently about installing a switch for the door lights
that will allow you to turn off the door lights while you are at a car
show.
Back to the Home of PROJECT VIXEN