Re: [DML] removing fuel pump
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [DML] removing fuel pump
- From: Travis Graham <thgraham@xxxx>
- Date: Fri, 16 Mar 2001 16:34:37 -0600
Hi Andy,
The electrical connections that you see connect to the fuel pump. That
thing beneath the water is the pump. I saw the same thing about a year ago
when I replaced my fuel pump.
It's easy to take out - just remove the large boot that has the fuel pump
sitting in it - it just slides off of the fuel tank (after you loosen a few
clamps of course). Just be sure your tank is low on petrol when you do the
job, else you'll have more difficulty/frustration when you're putting the
pump back in. Also, take care when removing the pump and note how the
baffle and pickup line inside the tank are situated - this will help when
you put it all back together.
If you have any questions, feel free to ask and I'll see if I can remember
the answer.
Good luck!
Travis
--
Back to the Home of PROJECT VIXEN