Re: [DML] Door alignment

[jtrealty@xxxx]

The answer is NO. You MUST remove the torsion bar to remove a door. Be 
very careful working around the torsion bar, see the archives and old 
posts on the subject. It also isn't worth the work re-aligning the 
door after removing. Get a string and tie the door part-way closed as 
you sit on the door sill. Tape all sharp edges inside or you will get 
sliced up.
David Teitelbaum
vin 10757



-- In dmcnews@xxxx, mrvideosawyer@xxxx wrote:
> Group,
> 
> Can doors be removed without taking out torsion bars?? The insides 
would be easier to work on when on the bench.
> 
> Jim
> Vin4149 "ELMO"
> __________________________________________________________________
> Get your own FREE, personal Netscape Webmail account today at 
http://webmail.netscape.com/