Re: [DML] Tail light problems

["DMC Joe" <dmcjoe@xxxx>]

Here is another tail light fix option
http://store.yahoo.com/dsvstore/zillalights.html

DMC Joe

"We're here to help you"

DMC Help / De Lorean Services / <dmchelp@xxxx>
Web Site: <www.deloreanservices.com>

----- Original Message -----
From: Les Huckins <jhuckins@xxxx>
To: <dmcnews@xxxxxxxxxxxxxxx>
Sent: Monday, February 12, 2001 8:25 PM
Subject: [DML] Tail light problems


> I covered this a day or two ago but I've been reading all of the
> archived material as quickly as time allows and several fixes have been
> mentioned, self tapping screws, wedges, little screws and nuts, etc.
> That aint it folks! It's not a problem of things getting loose due to
> vibration, It's oxidization, air gets in there and pretty soon no actual
> metal to metal contact. The other fixes would work for a long time, if
> you drilled out the rivets, did a good cleanup job, and then put the
> shims, screws, etc., back. Other than that, there are only two long
> term fixes, either solder or replacement. Do it right, you'll be
> happier.