Re: Hylomar

[srubano@xxxx]

Ooops...I made a mistake. I didn't use Hylomar reasembling my manual 
transmission case, I used Anaerobic sealant as Rob Grady instructed 
me to use. Permatex P/N 51817 for a 6 ml tube and Permatex P/N 51813 
for a 50 ml tube.

Steve

--- In dmcnews@xxxx, "Dave Swingle" <dswingle@xxxx> wrote:
> I used it when I rebuild my trans last year. Yeah - it
> leaks very slightly, not enough to note on the floor but there is 
always a
> drop "dangling" underneath. I just wrote it off to the gasketless 
design of
> the split-case, and figured that nothing else would do any better.
> Every DMC I've ever been under has the same leak. The only one I've 
ever
> seen that didn't was a car with less than 2000 miles on it, the 
trans has
> probably never been hot.
> 
> The fact that the case design has the lube sitting on the seam at 
all times
> is kind of an invitation to leak. I was impressed that the Hylomar 
that I
> took out was just as soft as the new stuff. Based on other 
experience,
> > 
> Dave Swingle