Re:Was Auto Trans Problems Now line pressure+vacuum

[jtrealty@xxxx]

To check the vacuum first do a visual inspection of the pipe and
hoses to the modulater. Next with the motor running attach a vacuum gauge
to the hose at the vacuum modulater to verify full engine vacuum. To 
adjust line pressure you really should review the procedure in the 
service manual. It involves running the motor with a gauge attached
at the line pressure port and turning the vacuum modulater to get the 
correct setting. This work is easy to do if you can get it on a lift 
but it is doable on a GOOD set of 4 jackstands. Always be extra 
careful working under the car especially with the motor running.

David Teitelbaum 
vin 10757