Re: [DML] Re: Lowering Questions

[Marc A Levy <malevy@xxxx>]

This is a BAD idea. The front springs were not designed to handle the weight of
the engine.

If you want to lower the rear, you can get the modified shock's from the club,
or PJ Grady. You can then move the spring seat lower, and lower the car with
your stock rear spring.

Steve Rubano wrote:
<SNIP>
> If someone really wanted to lower the rear, then they could save
> themselves allot of money by doing the following:
> Buy a set of front lowering springs and install them in the front,
> take the old OEM front speings that were on the car and put them in
> the rear.
<SNIP>