RE: [DML] Lowering the Front Springs

["Bryn Potter (NEC)" <v-brynp@xxxx>]

Willie , 

Your driving a Deolrean, not a Civic. Cutting a coil spring changes the drop
rate , bind rate and pre-compression. I suggest replacing the front
springs. David Raine from AT Auto Spring Warehouse in Carneyspoint NJ custom
made new front Delorean springs 15% stiffer and 45 mm (1 7/8" US) shorter
for under $150.00 US including shipping. Here is his phone number and
address. 

856-299-9141 DAVID RAINE AT AUTO SPRING WAREHOUSE

David Raine
425 harding highway 
Carneyspoint NJ 08069

Thanks
~Bryn




-----Original Message-----
From: wmack [mailto:wmack@xxxx]
Sent: Wednesday, January 03, 2001 10:07 AM
To: dmcnews@xxxxxxxxxxx
Subject: [DML] Lowering the Front Springs


I read in Delorean World that you could lower the front end of simply
cutting 
a couple of coils off of the original springs, rather than buying the new 
lowered springs. Has anyone had any success with this? and is it reliable?

Thanks
Willie
Vin 5043



Before posting messages or replies, see the posting policy rules at:
www.dmcnews.com/Admin/rules.html

To address comments privately to the moderating team, please address:
moderator@xxxx