Re: [DML] Lowering the Front Springs

["Kevin Creason" <dmc4687@xxxx>]

Only partially related...
Crest Chevrolet of CA was the original dealer for my car. In talking to
original owner I found out that they lowered all DMC12's that passed through
their dealership. Anyone familiar with their procedure, or heard of a dealer
doing that?

BTW-- I strongly urge all of you to track down your previous owners and have
a conversation with them if they are willing. I've spoken to two of three. I
may have a fourth owner that I was not aware of after talking to the
original owner. Oooh, and there are other exciting details that I will post
if I can get the FULL scoop from the missing owner(s).

----- Original Message -----
From: "wmack" <wmack@xxxx>
To: <dmcnews@xxxxxxxxxxx>
Sent: Wednesday, January 03, 2001 12:06 PM
Subject: [DML] Lowering the Front Springs


> I read in Delorean World that you could lower the front end of simply
cutting
> a couple of coils off of the original springs, rather than buying the new
> lowered springs. Has anyone had any success with this? and is it
reliable?
>
> Thanks
> Willie
> Vin 5043
>
>
>
> Before posting messages or replies, see the posting policy rules at:
> www.dmcnews.com/Admin/rules.html
>
> To address comments privately to the moderating team, please address:
> moderator@xxxx
>