Re: [DML] Colling system hoses
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [DML] Colling system hoses
- From: "DMC Joe" <dmcjoe@xxxx>
- Date: Wed, 3 Jan 2001 01:10:20 -0500
With the exception of the cold start valve and warm up regulator fuel lines
the water pump can be replace without disassembly of the fuel injection
system.
"We're here to help you"
DMC Help / De Lorean Services / <dmchelp@xxxx>
Web Site: (TEMPORARY)<www.geocities.com/dmcjoe>
----- Original Message -----
From: Rob Hook <robhook@xxxx>
To: <dmcnews@xxxxxxxxxxx>
Sent: Tuesday, January 02, 2001 7:31 PM
Subject: Re: [DML] Colling system hoses
> James,
>
>
> As for the water pump, the most common failure is that water will start
> leaking out of the weep hole on the front of the pump. It's not common
for
> the pump to make noise when failing. If you DID have to replace it,
> however, removing the rear fascia is not required. You DO have to remove
> the fuel injection system and intake manifold, however.
>
> --Rob Hook
Back to the Home of PROJECT VIXEN