Re: [DML] My glorious return

["DMC Joe" <dmcjoe@xxxx>]

Noah,

To test the idle speed microswitch operation; with the engine turned off,
have an assistant push and release the accelerator while you listen for a
"click" back at the engine compartment. If you don't hear a click the switch
is out of adjustment. If you do hear a "click" start the engine and ground
the black/green wire connected to the microswitch. If the idle drops to
normal the microswitch is defective.

"We're here to help you"

DMC Help / De Lorean Services / <dmchelp@xxxx>
Web Site: <www.deloreanservices.com>

----- Original Message -----
From: Noah <sitz@xxxx>
To: <dmcnews@xxxxxxxxxxx>
Sent: Monday, October 30, 2000 11:09 PM
Subject: [DML] My glorious return


> So, the question is, how to I test for microswitch failure (short of
> ordering a replacement and seeing if it works)? And if it passes, how to I
> test the ECU? And if /that/ passes, what else could it be?
>
> Ok, that's three questions. So I lied. Oh, I don't (yet) have the shop
> manuals, so I'm gonna need a bit of a walk through. I'll buy one when I
> have money again, which may be a little while. Did I mention that I just
> bought a delorean? :)
>
> Noah
> VIN 2867 (and loving it, I might add)
>