Coolant Fans

["John Hervey" <dherv10@xxxx>]

Dear Group, I will keep this short and sweet. Today I took apart the 
coolant fans and rebuilt them. The rotors were ok. I replaced the 
brushes, cleaned them, lubricated the bearings, fixed a wire that had 
the insulation rubbed off, adjusted the slack out of the shaft and 
replaced the roller pin. Watch my web site for more info coming on 
( COA ) Clean, oil and adjust. Once I get more brushes and washers in 
stock, the COA will be about $49.95 per motor.
John Hervey
www.specialTauto.com