Re: [DML] Installing ignition dist

["DMC Joe" <dmcjoe@xxxx>]

David,

If you have a DeLorean workshop manual you will find the information on the
proper procedure for the removal and replacement of the ignition distributor
at M:07:01. If you need additional information or a copy of the section
mentioned contact us directly.

"We're here to help you"

DMC Help / De Lorean Services / <dmchelp@xxxx>
Web Site: <www.deloreanservices.com>

----- Original Message -----
From: <Delorean17@xxxx>
To: <dmcnews@xxxxxxxxxxx>
Sent: Tuesday, October 03, 2000 7:40 PM
Subject: [DML] Installing ignition dist


> Hello,
> I am fixing up a DeLorean which sat outside for a long time. I am
> getting ready to install a new ignition distributor and was wondering if I
> have the right idea. I am not that much of a mechanic and have never done
> this before, I just want my car to run again!
> Do I get the # 1 firing cylinder in the firing position and have the
> distributor rotor ponted at the small mark on the inside of the
distributor
> housing? and then put the cap on it? question, How do I get the #1
cylinder
> in the correct firing position? what number should the mark on the pulley
> line up with? also, do I know what I am doing? its very possible I don't.
> please let me know if that is the case and tell me the correct way:)
email
> me privately.
> Thanks
> David