Re: [DML] Shift linkage adjustment

["DMC Joe" <dmcjoe@xxxx>]

Robert,

There are four nuts involved with gear shift linkage adjustment. Two each on the crossgate cable and two on the gear change tube.

"We're here to help you"

DMC Help / De Lorean Services / <dmchelp@xxxx>
Web Site: <www.deloreanservices.com>

----- Original Message ----- 
From: Robert Rooney 
To: dmcnews@xxxxxxxxxxx 
Sent: Wednesday, September 06, 2000 3:45 PM
Subject: [DML] Shift linkage adjustment


Does anyone here know the size of the nut on the shift linkage cable 
that's used for adjustment? I've tried using pliers, but the handle's 
are always too long to rotate the nut once I do get a grip on it. All 
of my open-end wrenches are American and none fit, so I'm guessing 
that the nut is metric (probably 10mm like almost everything else, 
but I just wanted to check first). Also, does anyone have any 
suggestions on loosening this nut? Any ideas would really be 
appriciated!

-Robert
vin 6585



Before posting messages or replies, see the posting policy rules at:
www.dmcnews.com/Admin/rules.html

To address comments privately to the moderating team, please address:
moderator@xxxx




[Non-text portions of this message have been removed]