Re: [DML] low profile rims for Delorean
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [DML] low profile rims for Delorean
- From: "Don Ekhoff" <ekhoff@xxxx>
- Date: Fri, 25 Aug 2000 10:01:29 -0700
With regards to selling the twin turbo: I am not really sure what I have.
I bought the car sight unseen based of the sellers representations that all
was well. Upon backing it off the transporter it was clear that that was
not exactly the case. I drove it directly to my favorite repair shop with
the intent to diagnose and repair as required. The engine ran OK and
because of a significant driveline "clunk" I did not get on the power much.
Initial diagnosis was a chipped tooth on the ring gear (probably having
something to do with the two nitrous tanks in the front trunk that were the
size of scuba tanks). Also the spools were frozen on the turbos. While the
engine is complete, it clearly has been stressed and I would not want to
warranty it. If you are in the San Jose, Calif. area I would be willing to
show it to you. It has been "palletized" for the last four years. Don
----- Original Message -----
From: <petleech@xxxx>
To: <dmcnews@xxxxxxxxxxx>
Sent: Friday, August 25, 2000 6:58 AM
Subject: Re: [DML] low profile rims for Delorean
> In a message dated 8/22/00 6:01:23 PM Eastern Daylight Time,
> ekhoff@xxxx writes:
>
> << ekhoff@xxxx >>
> Would you be willing to sell the twin turbo you are pulling out?
>
>
> Before posting messages or replies, see the posting policy rules at:
> www.dmcnews.com/Admin/rules.html
>
> To address comments privately to the moderating team, please address:
> moderator@xxxx
>
>
Back to the Home of PROJECT VIXEN