Re: [DML] Weak fan circulation
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [DML] Weak fan circulation
- From: "DMC Joe" <dmcjoe@xxxx>
- Date: Fri, 25 Aug 2000 00:58:41 -0400
Wayne,
Your problem may still be related to the AC mode switch. The first item to check is to insure that you have vacuum going to the mode switch. With the engine running and the fan speed at "1" (quite) rotate the mode switch through each position, you should be able to hear the various air deflection doors opening and closing as you change positions. If you don't hear any changes you are either not getting a vacuum feed to the mode switch or the switch may still be defective.
"We're here to help you"
DMC Help / De Lorean Services / <dmchelp@xxxx>
Web Site: <www.deloreanservices.com>
----- Original Message -----
From: deloreanernst@xxxx
To: dmcnews@xxxxxxxxxxx
Sent: Thursday, August 24, 2000 4:02 PM
Subject: [DML] Weak fan circulation
When I got my D in February, the heater would only blow one way... no
defrost, etc. All fan settings worked, but nearly all the air came from the
center of the dash. Ok, I rebuilt the mode switch, now I can redirect the air
as intended, but the flow is pretty feeble. A.C. just ooozes lazily out.
Defrost doesn't work any better, really, than when it didn't blow on the
windows at all. I usually ride around with the windows open, whether A.C. or
defroster is on or not. (I've been spending my cash on preventative
maintenance/replacement of safety items and mechanicals, not creature
conforts.) The fan sounds like it's blowing quite vigorously. I looked/
felt under the right dash and the hoses seem connected. No air gushing out.
But with the A.C. on, it felt a bit cool and breezy under the dash where you
cram your hand to reach the mode switch. Ideas anyone?
-Wayne
"Living the dream" (and sometimes squinting to see)
11174
Before posting messages or replies, see the posting policy rules at:
www.dmcnews.com/Admin/rules.html
To address comments privately to the moderating team, please address:
moderator@xxxx
[Non-text portions of this message have been removed]
Back to the Home of PROJECT VIXEN