Re: [DML] cooling problem!
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [DML] cooling problem!
- From: njp548@xxxx
- Date: Tue, 4 Jul 2000 19:31:32 EDT
Cliff,
Did you remember to connect the wires to the temp sensor that is inside
the water return line that runs along the side of the drivers side part of
the engine compartment? That controls the cooling fans. You will see a
black/orange wire and a green wire. The sensor is on the underside of the
cooling pipe. Hope that helps.
Later,
Nick
1852
Back to the Home of PROJECT VIXEN