Re: [DML] blue relay

["DMC Joe" <dmcjoe@xxxx>]

Felix,

Congratulations, you have discovered the highest failure rate component in
the DeLorean. The blue Fan Fail module has a 99% failure rate and is most
responsible for overheated engines. The problem became so serious that the
factory initiated the Fan Fail Modification which involved by-passing the
trouble prone module by removing the module and installing a link wire
assembly.

You have two options; you can purchase a fan fail modification kit for under
$40 or go with the Fanzilla a high tech cooling fan management
microprocessor price at $219.50.

DO NOT continue to drive your DeLorean if the module show signs of melting.

"We're here to help you"

DMC Joe / De Lorean Services / <dmcjoe@xxxx>
Web Site: <www.deloreanservices.com>
.

----- Original Message -----
From: F.S. <melvnhel@xxxx>
To: <dmcnews@xxxxxxxxxxx>
Sent: Friday, June 30, 2000 3:11 AM
Subject: [DML] blue relay


> Hello,
>
> I was looking at my relays and the blue one, the first one at the
> bottom left, Seems to have crispy melted wires attached to it. The blue
> plastic is also melted. There are two fused wires but I think the relay
> is missing. I think the manual said that this is the fan fail module.
> It seems that I have a fire hazard on hand. What should I do, replace
> the whole relay? When replaced, how could I avoid any further melting
> and fire!
>
> Thanks
>
> Felix