Re: [DML] low feul light

[dherv10@xxxx]

Wayne & Others. 

3 way's to check low fuel light working and how critical it is. 

#1.Take the cover off to expose the top of the fuel sending unit. Jumper clip 
the red & Black wire and you will see the light is working. 
#2.If you really want to see how critical it is on low or empty. Take the 
unit out and hook up digital multimeter with a buzzer. Connect the red and 
black wire to the meter and slowly turn the unit upright as the inside is 
droping and the see where the buzz comes in. Mine comes in at the very 
bottom. Ain't much gas left. Switch the meter to ohm's x10 and the ohm's 
reading at the bottom of the sending unit should be less than 1 ohm. 
#3. Run out of gas.

John
vin 11004