Re: [DML] Relay wire question???
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [DML] Relay wire question???
- From: "DMC Joe" <dmcjoe@xxxx>
- Date: Mon, 12 Jun 2000 23:05:48 -0400
All wires colored black in the electrical system are grounds. The melted
ground wire you mentioned is the result of a dead short across an un-fused
circuit. Open grounds in the electrical system can cause some circuits to
malfunction or not work at all.
NOTICE: We will be in Cleveland OH for the big DeLorean 2000 show June 12
through the 21st. Please hold all messages until after the 21st. Thanks
"We're here to help you"; See you in Cleveland!
DMC Joe / De Lorean Services / <dmcjoe@xxxx>
Web Site: <www.deloreanservices.com>
.
----- Original Message -----
From: <Delorean17@xxxx>
To: <dmcnews@xxxxxxxxxxx>
Sent: Monday, June 12, 2000 1:17 PM
Subject: [DML] Relay wire question???
> Hello,
> This is going to be a little hard to explain, but I'll try. On the
> bottom row of relays(7 in row) there is a black wire conecting relays
> #19,20,21,24 & 25. I think it may also connect to other relay(s) because
I
> have 2 connectors not hooked to anything. does anyone know what these
black
> wires are for? I would assume they are ground wires for the relays but I
am
> not sure. All the wires in my compartment are perfect except this black
one
> is melted and is bare in most places(even cut). most of my electronics
don't
> work(locks,mirrors,windows) I am going to replace this wire because it is
> cut in half and obviously not doing what it is made to do. I just want to
> know what it is for. Could this be the reason why a lot of my electronics
> don't work?
>
> Thanks,
> Dave
> #2496
Back to the Home of PROJECT VIXEN