Re: [DML] Camshaft
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [DML] Camshaft
- From: "BRUCE BENSON" <delornut@xxxx>
- Date: Wed, 7 Jun 2000 21:54:46 -0500
I recently had a rough idle problem although when under way the engine ran
great. I went through all the usual tests for vacuum leaks and such but
finally just took a long screw driver and pushed every injector down into
it's
socket. Low and behold when I hit one that seemed to pop down a bit more
than the rest the idle improved dramatically. I did have the fuel
distributor and air intake off recently to access the clutch slave cyl.
Apparently I must have pulled a bit too hard on the fuel lines and pulled
one injector out of it's socket.
Bruce Benson
We are trying to isolate a rough-running problem in our car. We
> suspect the injection system but have tried everything in our ability
> with no success. >
Back to the Home of PROJECT VIXEN