Re: [DML] Engine Cover help

["DMC Joe" <dmcjoe@xxxx>]

The easiest way to align the latch is by adjusting the engine cover striker
bar (parts manual 8/4/4 #16). If you are unable to achieve latching with
this adjustment you will have to adjust the plate & stud (8/4/3 #16) at the
sunshade. Be aware that this adjustment will effect the entire alignment of
the sunshade.

Writes note: Except for concourse judging the latching mechanism has no
practical use. The sunshade will hold its position by gravity and does not
require the latch to be operational.

"We're here to help you"; See you in Cleveland!

DMC Joe / De Lorean Services / <dmcjoe@xxxx>
Web Site: <www.deloreanservices.com>
.

----- Original Message -----
From: <deloreanernst@xxxx>
To: <dmcnews@xxxxxxxxxxx>
Sent: Friday, June 02, 2000 2:00 PM
Subject: Re: [DML] Engine Cover help


> In a message dated 6/2/00 7:25:26 AM Eastern Daylight Time,
> michael.babb@xxxx writes:
>
> << I managed to get the
> louvers to re-latch the right way (and quit rubbing little holes on my
new
> paint job). >>
>
> My louver doesn't latch. Just lays there by gravity. How did you make it
> latch?
>
> -Wayne
> 11174