RE: [DML] New tachometer, still nothing

["David Jacobs (NEC)" <v-davidj@xxxx>]

Hi Dave....

I was having problems with my gages a while back. The needles would
shake when I turned on the power. I later found that I needed to repair
some of the ground wiring. I know that this is a little different from
your problem, but I thought I would offer the advice anyway. You might
want to check to make sure that the tach is getting the correct amount
of current, and that the polarity is correct. I would also check the
fuses to make sure that the current one is in place.

Hope this helps. If you end up finding a solution, please let me know.

Thanks!

Dave

-----Original Message-----
From: Delorean17@xxxx [mailto:Delorean17@xxxx]
Sent: Monday, May 29, 2000 6:45 PM
To: dmcnews@xxxxxxxxxxx
Subject: Re: [DML] New tachometer, still nothing


Hello again list,
maybe I didnt explain my problem good enough. The tach never moves.

when you drive the car it stays at 9000 RPMS even if its in idle. when
I put 
in the new tach and I received no movement from it at all. what could
this 
be? I know it stays at wherever the its at when the car turns off. any

ideas?

thanks

dave


Before posting messages or replies, see the posting policy rules at:
www.dmcnews.com/Admin/rules.html

To address comments privately to the moderating team, please address:
moderator@xxxx



[Non-text portions of this message have been removed]