Re: [DML] cooling fans

["DMC Joe" <dmcjoe@xxxx>]

Brian,

The first item to check is to be sure that you have 12 volts at the cooling
fan (blue) socket and by-pass fuses. Let me know the result of your test.

"We're here to help you"; See you in Cleveland!

DMC Joe / De Lorean Services / <dmcjoe@xxxx>
Web Site: <www.deloreanservices.com>
.

----- Original Message -----
From: Lynn Metz <metzlynn@xxxx>
To: <dmcnews@xxxxxxxxxxx>
Sent: Sunday, May 28, 2000 12:10 PM
Subject: [DML] cooling fans


> Group:
>
> Well, I now have one of the normal problems - my cooling fans. It appears
> that they stopped coming on yesterday. (There were fine 2 days ago.) I
> just replaced the temp. sensor and I know it is OK. The fans used to come
> on before the temp guage hit half way. Yesterday, it went over half way
up.
> When I jumpered the switch, I could hear a clicking (assume this is the
> relay trying to engage) but the fans won't come on. Then, when I plug the
> wires back onto the switch, I hear the clicking again. So, the switch is
> fine. My car has the wired modification upgrade with 2 fuses (no
fanzilla).
> The fuses are good. Where should I start? Can I check for voltage at
the
> fans themselves? I don't think both fans went bad at the same time. What
> else could it be besides a wiring problem? Need to get this fixed before
> Cleveland.
>
> Any help is appreciated.
> Thanks,
> Brian 16584