Re: [DML] Rust

["JDL" <jdl@xxxx>]

Wouldn't something like that end up having the same problem as epoxy, in the
long run?

David Levey
----- Original Message -----
From: "Scott" <OUTATIME@xxxx>
To: <dmcnews@xxxxxxxxxxx>
Sent: Wednesday, April 05, 2000 3:28 PM
Subject: Re: [DML] Rust


> Just a thought...
>
> I was wondering if the "Spray In" approach or Linex would be a good idea
for
> frame rust prevention
> and overall durability, and worry free care. (I am reffering to the spray
> on bedliner material)
>
> Ive seen it done on Boats, Aluminum, Wood ets you name it
>
> Any thoughts
>
> Scott Duke
> Virginia
> VIN#????
> -----Original Message-----
> From: JDL <jdl@xxxx>
> To: DeLorean Motor Company Internet Newsgroup <dmcnews@xxxxxxxxxxx>
> Date: Wednesday, April 05, 2000 11:03 AM
> Subject: [DML] Rust
>
>
> >How difficult is it to remove the rust from a DeLorean frame. It is an
> issue most of us will have to deal with when the epoxy cracks and water
gets
> in. Naval Jelly/Converter can convert all rust on a frame to a black
inert
> oxide. A number of coatings are available that work much better than the
> old epoxy. And frames can be welded to add extra strength if needed. Has
> anyone on here done this in the recent past (5-15 years) with success and
> satisfaction?
> >
> >David Levey
> >Cleveland
> >
> >PS- If anyone wants to go to the Mark DeLorean fundraiser featuring a
> visit by John Z, April 12th, please let me know. If you have already
> requested an invitation, you should have it or it should be on the way...
> >
> >
> >[Non-text portions of this message have been removed]
> >
> >
> >
> >Before posting messages or replies, see the posting policy rules at:
> >www.dmcnews.com/Admin/rules.html
> >
> >To address comments privately to the moderating team, please address:
> >moderator@xxxx
> >
> >
>
>
>
> Before posting messages or replies, see the posting policy rules at:
> www.dmcnews.com/Admin/rules.html
>
> To address comments privately to the moderating team, please address:
> moderator@xxxx