[DML] Re: Engine Cove Hinge

[DeLorean31@xxxx]

In a message dated 3/25/00 8:55:06 PM Eastern Standard Time, 
ian@xxxx writes:

<< Gary,

If you get a knowledgeable response to your query, could you forward it to
me please. I need to access the same to re-attach/tighten them as they
rattled loose at Christmas. >>

Well, I replaced the engine cover hinge with help of the parts manual. It 
was actually pretty easy. Just unscrew the four screws holding the top loop 
brackets for the cargo net. Then carefully work the rear panel forward from 
the top. It is held on the bottom by two brackets that easily slide of the 
lips when you lean it forward from the top and out. You will then have to 
gently bring down the panel slightly that has the rear cargo light in it. I 
was able to access the nuts for the hinge by just bringing the panel down 
slightly and I didn't have to remove it completely. It is tied in behind the 
rear speaker panels. Just be careful with it it is fragile. This procedure 
worked for me and allowed me to fix the last little thing I wanted to on the 
car. I thoroughly enjoy working on the car myself. Well maybe something 
will break to keep me busy :) If anyone wants more details email me 
privately. Hope this helps

Gary Gore
Activities Director
DeLorean Mid Atlantic
VIN3360
<A HREF="http://members.aol.com/delorean31/index.html";>DeLorean Data Bank</A>