[DML] Re: Mirror switch - Jumping Procedure

["Vicky Miller" <delo1@xxxx>]

hello all/ i had the same problem with my switch. i was able to repair it
using all the parts that were inside//this can be done but is a tough
procedure?? good luck bob miller



-----Original Message-----
From: DMC Joe <dmcjoe@xxxx>
To: dmcnews@xxxxxxxxxxx <dmcnews@xxxxxxxxxxx>
Date: Sunday, March 19, 2000 7:13 AM
Subject: [DML] Re: Mirror switch - Jumping Procedure


>The mirror switch adjuster is non-serviceable as you have discovered. New
>switches are available from us and the other DeLorean part suppliers for
>$54.09.
>
>DMC Joe / De Lorean Services / <dmcjoe@xxxx>
>Web Site: <www.deloreanservices.com>
>.
>
>----- Original Message -----
>From: Jonathan Heslop <gatewayaag@xxxx>
>To: <dmcnews@xxxxxxxxxxx>
>Sent: Saturday, March 18, 2000 7:43 PM
>Subject: [DML] Mirror switch - Jumping Procedure
>
>
>> It all started with an inoperative switch...............
>>
>> The window switch worked fine on everything but the horizontal control
for
>> the right side. I popped the switch out and began to take it apart. BIG
>> MISTAKE!
>>
>> This is the most complex set of parts and wiring design I've ever seen
for
>> such a simple switch. The guy that desgined this must have been a mad
>mad!
>>
>> Springs, rods, ball bearings, etc went all over the work bench when I
>opened
>> this thing up. I gathered the parts, cleaned the contacts, and spent two
>> hours trying to get this thing back together. I took it out to the car
>and
>> hooked it up. It worked!! I pushed in into the hole and went to put the
>> knob back on. I pushed on the knob to secure it and that's when it
>> happened........POP! The back came off and those dozen little parts shot
>> into the door panel. I retrieved a good number of the parts after hours
>of
>> searching, but the rest are gone for good.
>>
>> Does anyone have a junk window selector switch or some of it's
>components??
>> I'm missing one of the BB's, a "bar bell" rod, and the bigger of the two
>> springs (used behind the BBs).
>>
>
>
>
>------------------------------------------------------------------------
>Before posting messages or replies, see the posting policy rules at:
>www.dmcnews.com/Admin/rules.html
>
>To address comments privately to the moderating team, please address:
>moderator@xxxx
>
>------------------------------------------------------------------------
>eGroups.com Home: http://www.egroups.com/group/dmcnews/
>http://www.egroups.com - Simplifying group communications
>
>