[DML] Re: Lowering spings (some measurements)

["Robert and Andrea" <ragill@xxxx>]

Hey Marc nice car thanks for the info on lowering the "D". Liked the
picture. I also have a mustang in my garage. It is a 65 convertible have
been slowly restoring it for about four years now, sorry to say there is no
end in sight.
-----Original Message-----
From: Marc A Levy <malevy@xxxx>
To: DMC News <dmcnews@xxxxxxxxxxx>
Date: Thursday, March 09, 2000 9:41 AM
Subject: [DML] Lowering spings (some measurements)


>I have posted a picture of my car with the DMC Houston springs at
>http://remus.rutgers.edu/~mxl/dmc/DMCRightSide.jpg
>
>They can be compared with how the car was with the cut & swap springs at
>http://remus.rutgers.edu/~mxl/dmc/Ser6-10.JPG
>
>I also took some measurements of the car now:
>
>Top of front tire to bottom of fender: 3 inches
>Top of rear tire to bottom of rear quarter: 1 inch
>
>Front Ground to top of black plastic runner (bottom of door): 12 Inches
>Back Ground to top of black plastic runner: 11 Inches
>
>Front ground to bottom of frame: 6 Inches
>Back ground to bottom of frame: 5 Inches
>
>------------------------------------------------------------------------
>Before posting messages or replies, see the posting policy rules at:
>www.dmcnews.com/Admin/rules.html
>
>To address comments privately to the moderating team, please address:
>moderator@xxxx
>
>------------------------------------------------------------------------
>
>eGroups.com home: http://www.egroups.com/group/dmcnews
>http://www.egroups.com - Simplifying group communications
>
>
>
>
>