[DML] Re: Separating Body from Frame...
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[DML] Re: Separating Body from Frame...
- From: "DMC Joe" <dmcjoe@xxxx>
- Date: Mon, 7 Feb 2000 13:35:16 -0800
Don't forget the shifter to center console trim pieces.
Manual trans: Parts manual 8/7/0 fig 36 with boot.
Auto trans: parts manual 4/6/0 fig 1 through 16
DMC Joe / De Lorean Services / <dmcjoe@xxxx>
Web Site: <http://www.deloreanservices.com>
----- Original Message -----
From: <NJP548@xxxx>
To: <dmcnews@xxxxxxxxxxx>
Sent: Sunday, February 06, 2000 9:15 PM
Subject: [DML] Separating Body from Frame...
> Hey List,
>
> I am going to be removing the body from the frame of my car and I
> just wanted to run this past the list to see if I have listed all the
parts
> that connect the frame to the body. So if you all can run over this list
and
> tell me if I forgot something I would greatly appreciate it. Thanks!
>
> Remove 6 body mounting bolts from inside car
> Remove 2 body mounting bolts from the back of car, Pontoons
> Remove Engine compartment crossbrace in back of compartment
> Remove 2 body mounting bolts from front shock towers
> Remove 2 brake lines from Brake Master Cylinder
> Remove 1 clutch line from Clutch Master Cylinder
> Remove Fuel Filler hose and vent hose
> Remove All Engine compartment Wiring connections
> Remove throttle cable from spool
> Remove all 3 vacuum hoses from Charcoal Canister in LH pontoon wall
> Remove Gas Fuel Line from Filter to Fuel Distributor
> Remove Air Conditioner line from Condenser to Evaporator
> Remove Air Conditioner line from Accumulator to Air Compressor
> Remove Hoses connected to Heater Core
> Remove Steering connection to Rack assembly
> Remove Speedo cable from angle drive to Lambda Service counter
> Remove Hoses going to heater bottle assembly.
Back to the Home of PROJECT VIXEN