[DML] Re: Cooling Fans
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[DML] Re: Cooling Fans
- From: "Duke Bladorn" <at88mph@xxxx>
- Date: Mon, 7 Feb 2000 07:40:12 -0600
Joe,
You stated that the otterstat switch seems fine but did you jump the
otterstat switch? If not, unplug the two female connectors from it and
insert a jumper wire into the female connectors. Start the car and if the
fans come on you have a bad otterstat switch.
Hope this helps,
Duke
----- Original Message -----
From: Joe Palatinus <jpalatinus@xxxx>
To: <dmcnews@xxxxxxxxxxx>
Sent: Saturday, February 05, 2000 6:02 PM
Subject: [DML] Cooling Fans
> Hello List
>
> I left the engine running for about a half hour, and when I cam back I saw
> smoke comming from the engine bay, and the temp guage was at 260. The
> cooling fans failed to come on. Since I got the car the cooling fan fail
> light has been on, but the cooling fans always worked until now. I was
> pulling on the horn cable, this was the only hing I was doing near the
> fans befre this started. I have the y spliter in the correct positions on
> the fan fail module, and the fuse is ok. I tried to trace the electrical
> connections, but they all look good. There is no horn on the right side
of
> the car, and the only missing electrical connections are one female
> connecter with one wire going to it, tht I am certain, goes to the not
> present horn, and a frayed thin black wire, which I believe goes to the
> horn female connecter as well. The cooling fans are both connected, with
> that huge rope of a wire. Does anyone have any ideas where to look for a
> disconnection?. The otterstat (switch in the hose near engine)seems fine.
> I have been under my car for hours, but have found no dissconection.
> Thanks
> Joe P.
> VIN 17167
> 6808
>
> ------------------------------------------------------------------------
> Before posting messages or replies, see the posting policy rules at:
> www.dmcnews.com/Admin/rules.html
>
> To address comments privately to the moderating team, please address:
> moderator@xxxx
>
> ------------------------------------------------------------------------
>
> eGroups.com home: http://www.egroups.com/group/dmcnews
> http://www.egroups.com - Simplifying group communications
>
>
>
>
Back to the Home of PROJECT VIXEN