[DML] Re: Ignition Distributor

["Duke Bladorn" <at88mph@xxxx>]

There are two allen screws holding the fuel distributior/air fuel mixture
assembly down. They are on the top-rear of the intake. Remove these two
allen bolts and you can lift the fuel distributor up enough to easily get
the cap off.


Hope this helps,


Duke

----- Original Message -----
From: gwells <gwells@xxxx>
To: <dmcnews@xxxxxxxxxxx>
Sent: Thursday, December 30, 1999 2:51 PM
Subject: [DML] Ignition Distributor


> I need to remove the cap to the Ignition Distributor. The books say to
> remove the whole distributor you need to remove first the fuel
distribution
> unit. By the looks of it, the same applies if you only want to remove the
> cap. Is this correct, or is there some way in which the cap can be removed
> without removing anything else.
>
> G.H.Wells
> VIN 17152
>
>
> ------------------------------------------------------------------------
> Before posting messages or replies, see the posting policy rules at:
> www.dmcnews.com/Admin/rules.html
>
> To address comments privately to the moderating team, please address:
> moderator@xxxx
>
> ------------------------------------------------------------------------
>
> eGroups.com home: http://www.egroups.com/group/dmcnews
> http://www.egroups.com - Simplifying group communications
>
>
>
>