[DML] Re: Service with a Frown

["SweatyEddy" <swetyedy@xxxx>]

Instead of grinding a 3/8" exctension to a 5/16" I just bought a 3/8" to
5/16" adapter from snap-on. Fits on to your standard 3/8" ratchet and is
5/16" on the end.
-SweatyEddy

----- Original Message -----
From: <SAND131@xxxx>
To: <dmcnews@xxxxxxxxxxx>
Sent: Saturday, November 27, 1999 5:39 PM
Subject: [DML] Re: Service with a Frown


> In a message dated 11/27/99 10:20:43 AM Central Standard Time,
> DTrue10521@xxxx writes:
>
> << I believe you can make your own wrench to remove the oil plug from a
> length
> of 5/16 square stock. It worked real well for me. >>
> That will work or you can take a 3/8" short socket extension and grind it
> down to 5/16" But my choice is to find the local Snap On dealer and have
him
> sell you Part #PPM 410 3/8" drive 5/16" Square male adapter.
> Ralph Vin 1606
>
> ------------------------------------------------------------------------
> Before posting messages or replies, see the posting policy rules at:
> www.dmcnews.com/Admin/rules.html
>
> To address comments privately to the moderating team, please address:
> moderator@xxxx
>
> ------------------------------------------------------------------------
> -- Easily schedule meetings and events using the group calendar!
> -- http://www.egroups.com/cal?listname=dmcnews&m=1
>
>
>