[DML] Re: Heat shields.
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[DML] Re: Heat shields.
- From: "DMC Joe" <DMCJOE@xxxx>
- Date: Sat, 13 Nov 1999 14:46:38 -0500
Driving the car without a muffler heatshield will cause premature failure
of the drive belts, pulley bearings, front engine crankshaft seal, camcover
seals, and the wiring harness. The heatshield supplied by PJ Grady, and DMC
Houston are factory spec. and will fit perfectly.
DMC Joe / DeLorean Services / <dmcjoe@xxxx>
Web Site: <http://www.deloreanservices.com>
----------
> From: Sjaeger01@xxxx
> To: dmcnews@xxxxxxxxxxx
> Subject: [DML] Heat shields.
> Date: Friday, November 12, 1999 12:08 AM
>
> I need to replace the heat shields on my Delorean, they are falling
apart. I
> was just curious what other owners have done. Did you just replace them
with
> shields available from the Delorean parts suppliers, replaced them with
> something else or not replace that at all? Is there other options?
>
> Thanks
> Steve
>
> ------------------------------------------------------------------------
> Before posting messages or replies, see the posting policy rules at:
> www.dmcnews.com/Admin/rules.html
>
> To address comments privately to the moderating team, please address:
> moderator@xxxx
>
>
> eGroups.com home: http://www.egroups.com/group/dmcnews
> http://www.egroups.com - Simplifying group communications
>
>
>
Back to the Home of PROJECT VIXEN