[DML] Re: rear ground clearance

["DMC Joe" <DMCJOE@xxxx>]

All factory DeLoreans have elevated front ends due to a last minute
production change. Forget about cutting springs, simply purchase the
re-calibrated lower springs from PJ Grady or DMC Houston.

DMC Joe / DeLorean Services / <dmcjoe@xxxx>
Web Site: <http://www.deloreanservices.com>

----------
> From: MARK DAVIDSON <WMARKDAVIDSON@xxxx>
> 
> Can you tell me the correct ground clearance for the front and rear of
the
> car? I have read that the rear is 6.1 inches and 6.87 inches. I had new
> tires put on the car and was told by the installer that the car was an
inch
> low in the rear (5.8 inches). When you set in the drivers seat and look
at
> the rear view mirror you see more of the headlinner than the read window.
As
> this is my first D and I have not been around any before so I do not know
if
> this is "normal" From the outside the car looks like it is setting
> correctly. I have head stories about cutting the rear springs and moving
> them to the front etc. Any help would be appreciated.
> 
> mark