[DML] Re: Fuel Enrichment Circuit
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[DML] Re: Fuel Enrichment Circuit
- From: David Sontos <dsontos@xxxx>
- Date: Tue, 22 Jun 1999 19:19:35 -0400
Hi Joe,
The original thread was for stalling and rough idle for the first couple of
minutes then the engine runs fine. When first started it dies immediately,
restart and die again. This happens for several tries until the engine will
just stay running, (very rough) . Any application of the gas pedal kills the
engine during this time. After two or three minutes, no problem, engines runs
smooth and accelerates fine.
The replies to the thread implied the problem was in the fuel enrichment
circuit, mainly the warmup regulator (102353) and the frequency valve (102395).
Rather than blindly replacing these components I would rather have a means of
diagnostics. Snapon Tools has a nice little fuel injection test kit for only
$795.00, but I could replace a lot of parts for that much.
So that's the story, any ideas.
Dave
DMC Joe wrote:
> Dave,
> There are many items that could cause fuel enrichment problems, the
> pressure regulator is just about last on the list of items that could be
> defective. What kind of fuel enrichment problems are you having.
------------------------------------------------------------------------
eGroups.com home: http://www.egroups.com/group/dmcnews
http://www.egroups.com - Simplifying group communications
Back to the Home of PROJECT VIXEN