[DML] Re: A/C Blower Motor
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[DML] Re: A/C Blower Motor
- From: "Vicky Miller" <delo1@xxxx>
- Date: Mon, 21 Jun 1999 10:34:08 -0400
hi there is a small stud with a rubber cap directly over the blower .this is
used for a stop for the hood this is where the water enters. remove -and
seal this should fix the problem questions call bob 919 383 6187 thanx bob
riginal Message-----
From: William F. Lane <blane@xxxx>
To: Delorean News group <dmcnews@xxxx
m>
Date: Sunday, June 20, 1999 10:46 PM
Subject: [DML] A/C Blower Motor
> Just replaced my blower motor for the third time. This time the motor
>had frozen from rust. Can anyone tell me what to do to keep water out
>of the motor. The cowl drain was cleaned out but it was not stopped up
>enough to cause water to divert to another route.
>
>Thanks,
>
>Bill Lane
>blane@xxxx
>vin 3635
>
>
>------------------------------------------------------------------------
>eGroups Spotlight:
>"Lightning Strike Survivor List" - on-line support group for lightning
strike
>survivors and their families. http://clickhere.egroups.com/click/111
>
>
>eGroups.com home: http://www.egroups.com/group/dmcnews
>http://www.egroups.com - Simplifying group communications
>
>
>
>
------------------------------------------------------------------------
eGroups.com home: http://www.egroups.com/group/dmcnews
http://www.egroups.com - Simplifying group communications
Back to the Home of PROJECT VIXEN