[DML] Re: window questions

[ABatt10347@xxxx]

Sam,
The problem is 1. In the switch (as Joe said), 2. wiring between switch and 
motor, 3. Or it maybe that the window track is not lubed enough. I had this 
problem once. I would hit window switch and see voltage drop on dash but no 
window movement. Took panels off the door and lubed window track volia the 
window went up and down perfectly. (Note I had already swapped switches from 
drivers side to pass side.)Before lubing I was ready to buy a new window 
motor. This might not work in your case but do try all steps (switches, test 
for current in wires, and lube the window track). Good luck. By the way 
search back issues to find correct way to take door apart (if needed). Its 
not hard if done right. Its a nightmare to just remove stuff and try and 
figure out how it all works when reassembling.
Bruce Battles
Vin 6569

------------------------------------------------------------------------
eGroup home: http://www.eGroups.com/group/dmcnews
http://www.eGroups.com - Simplifying group communications