[DML] Re: Problems Installing Door Lock Actuators...Any Help?

[tobyp@xxxxxxxxxxxx]

Patrick - I am posting this for the benefit of the List.  I received 
your email regarding your challenges, and have sent you an extensive 
reply in order to help you sort through the possible issues.  As I 
stated in my reply, I believe the primary problem is with your door 
lock module.  It has probably been damaged by trying to pass too 
much current through as it attempted to feed those solenoids that 
you've removed.  A local owner had very similar problems, and a 
quick relay and capacitor replacement inside his DeLorean door lock 
module solved the problems completely.  Please let myself and the 
List know what you find out, so that everybody can benefit from your 
experience.  Thanks.

Toby Peterson  VIN 2248 "Winged1"
DeLorean Parts Northwest, LLC
www.delorean-parts.com  


--- In dmcnews@xxxxxxxxxxxxxxx, "p12c16" <PRC1216@xxxx> wrote:
> 
> 
> Hey there all,
> I hope you had a good holiday.  I just got a set of DPNW's door
> lock actuators and attempted to install them yesterday in my 30 
degree garage.  Everything is hooked up exactly as the instructions 
stated, yet they still don't seem to perform much better than my 
solenoids that I thought were burned out.
<snip>  








To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/