[DML] Re: Centering the air meter plate

["Matt Spittle" <supermatty@xxxxxxx>]

Ok, this type of alignment seems impossible.  I tightened the screw 
next to the mixture adjustment hole as far as it would go, and the 
plate still "rests" slightly above the surrounding edge.  There 
seems to be no way to get it to sit lower than this without having 
the edge of the plate hitting against the edge.  Is there another 
way to adjust it even more?  

Right now it looks like this:

\                   /
 \ --------------  /
  \               /
  /               \
 /                 \
/                   \

Loosening the adjustment screw only seems to raise it even higher.  
Tightening it brings it to this position.  I can't imagine the 
venturi has ever been taken apart before, so I doubt I'm missing any 
pieces.  
Matt
#1604


--- In dmcnews@xxxxxxxxxxxxxxx, "John Hervey" <john@xxxx> wrote:
> 
> Matt, The metering plate is very critical to the mixture but also 
to the
> vacuum / air it moves. It will have to be adjusted to where you 
have a point
> to point alignment.
> Like this > -- <. John Hervey
> www.specialtauto.com
> 









To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/