[DML] Re: WD-40 as a stainless cleaner?

["David Teitelbaum" <jtrealty@xxxxxxxxxxx>]

WD-40 is fine. It is just that it will leave the surface oily which
will attract a lot of dust and dirt. I use alcohol and Windex. They
leave the surface dryer and with no residue. I save the expensive 3M
stuff for special occasions or if I regrain. The WD-40 is probably not
great to use on the rubber seals so stay away from the door seals with
it.It is also messy on glass. Spray it on a rag and then wipe the car
with it instead of spraying directly on the S/S. It is VERY good for
the power antennae but again spray it on a rag and then wipe the
antennae mast. Stay away from the rub strip with the Goo-Gone. It can
loosen the glue holding the rubber on.
David Teitelbaum
vin 10757


--- In dmcnews@xxxxxxxxxxxxxxx, ComposerZelgadis@xxxx wrote:
> 
> I'll be perfectly honest, I have very little knowledge of stainless
steel  in 
> general (i.e. do's and don'ts).  However, at work, we have a few
wooden  
>








To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/