[DML] Re: Turn signal loads for LED's

["Mike" <mquinto@xxxxxxxxxxx>]

Hi Rich,
I'm using that load resister to make my led light function for the 
Alternator dash light.
For my blinkers I'm using a variable load flasher made by Trucklite 
ULTRAFLASH II, with audible signal.
Its made strictly for big rigs using an LED system. It can handle 
both 12 and 24v electrical systems. It's a little overkill for the 
DeLorean but it was free and it works fine. It's been installed for 
about 3 years now, and very easy to install.

Good Luck, 
Mike
Vin#1113








To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/