[DML] Re: Front frame extension questions.

["Dave Swingle" <swingle@xxxxxxxxxxx>]

You might want to check with a vendor anyway (I think most of them 
offer it) - about three posts back someone noted that European-built 
components look pretty expensive in the US given the exchange rate, 
which ought to make US-built parts not look so bad. I doubt anyone 
who's gone to the trouble of engineering such a component is going to 
give away the engineering design.

Dave S

--- In dmcnews@xxxxxxxxxxxxxxx, dmcjohn@xxxx wrote:
> 
> 
> Hi lads,
> I would like to have a front frame extension fabricated to replace 
> the one that is on my car. I've a few questions on this if anyone 
> could help, I would really appreciate it.
> 
> 1. Are the exact dimensions of the front frame extension available 
> anywhere? Any engineering drawings? 
> 
> 2. In Service Bulletin ST-03-2.82 
> 
> (http://www.dmcnews.com/bulletins/ST-03-2.82.html) 
> 









To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/