Re: [DML] Misfiring on low RPM
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [DML] Misfiring on low RPM
- From: "neeliuz" <dmc@xxxxxxxxxxxxxxx>
- Date: Fri, 29 Oct 2004 07:22:30 -0000
I checked as good as I could. Especially the vaccum delay
connections around the warm up reg. area.
I have just replaced my waterpump and this problem came after
that operation. I installed the water pump kit from huston with all
gaskets etc så i dont suspect a leak in the intake.
One mystery is the air aux pipe from the idle speed motor, what is the
effects of air leaks there ?
Is it possible that a ign cable has been damaged ?
The car runs great on every rpm above 1200.
Regards
Johan
--- In dmcnews@xxxxxxxxxxxxxxx, "David Teitelbaum" <jtrealty@xxxx>
wrote:
>
>
> How did you check vacuum, ignition cables, etc? It could still be
that
> and/or other things like a dirty fuel injector, worn spark plugs,
one
> of the timing advance systems not working correctly etc. There a
just
> a lot of things that can cause or contribute to these symptoms.
> David Teitelbaum
> vin 10757
>
> --- In dmcnews@xxxxxxxxxxxxxxx, "Johan" <dmc@xxxx> wrote:
> >
> > I have a strange problem.
> >
> > 700-1500 RPM engine runs bad, no power shakes alot.
> >
> > 1500 and above engine runs normal.
> >
> > I have checked vaccum, ignition cables etc.
> > What causes this ?
> >
> > Regards
> > Johan
> > 5425
To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx
For more info on the list, tech articles, cars for sale see www.dmcnews.com
To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/dmcnews/
<*> To unsubscribe from this group, send an email to:
dmcnews-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
Back to the Home of PROJECT VIXEN