Re: [DML] Re: door seal

["Elvis Nocita" <elvisnocita@xxxxxx>]

I don't see why he should adjust the anchor pins when they worked properly
before ?

I guess he has the common problem now, that the inner door seal
on the top front outer corner is touching the door when closing.

Gerhard, check out if the seal is being pulled to the inside of the 
car when closing the door. That's very often a problem with new door 
seals. Don't mess with the anchor pins if they were set correctly before.

Maybe it's a good idea to get you in touch with some other Austrian
owners.

Elvis & 6548


> 
> It is very likely that the anchor pins that the door locks close on
> were adjusted to the old, worn door seals. With the new seals the pins
> must be readjusted. It is not too hard to do but if you don't have a
> lot of experience it could take a while of trial-and-error. Take the
> round rubber grommets off and you will see that you can put a wrench
...cut....

-- 
+++ GMX DSL Premiumtarife 3 Monate gratis* + WLAN-Router 0,- EUR* +++
Clevere DSL-Nutzer wechseln jetzt zu GMX: http://www.gmx.net/de/go/dsl






To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/