[DML] Re: Changing oil question

["thebrave65" <johnnysher1@xxxxxxx>]

Yes you need a special tool to remove the plugs.  You can grind a 
socket wrench down, you can buy the tool from Snap-On or from one of 
the vendors.

Dude, do yourself a favor and read the archives.  This has been 
mentioned many, many times over and has all of the needed info you 
are hungry for - including the part number for the Snap-On tool.

Trust me.  Take the time to read them over and you'll end up 
finishing the work on your car a lot faster!

Johnny
5518
> 
> 
> Don't worry about the spark plugs I got them all done myself.  It 
> just took some work to get at the ones on the left side.  Well now 
> I'm trying to change the oil, but I can't figure out how to get the 
> plug out of the oil pan.  It looks like it just has a square hole 
> where you put in a ratched with no socket and unscrew it that way, 
> but everything I've tried is either too small or too big.  It looks 
> like the same plug on the transmission fluid pan but it is hard to 
> see.  Is there a special tool to get the plug out?
> 
> Thanks for the help
> 
> Japheth VIN: 1223








To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/