[DML] Re: Removing Broken CO Adjustment Wrench

["content22207" <brobertson@xxxxxxxxxxxx>]

The fuel/air mixture unit is surprisingly easy to disassemble. Pivot
shaft is NOT pressed in (air sensor plate counter weight does hold it
tightly however -- loosen the two screws on either side, accessed from
below). Then simply remove the snap rings and push it out with a
screwdriver. Can extract the broken allen wrench, free up the CO
adjustment screw, etc.

This unit does need to be vacuum tight -- treat yourself to a new
gasket from one of the vendors during reassembly. May as well replace
all the O rings as well.

Bill Robertson
#5939



To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/